|
  |
IFP Series of Products |
| Addressable Fire Alarm Panels | ||||
 |
IFP-2000 • 636 points per panel • Networkable with up to 8 nodes (16 nodes for Select Distributors) for a total of 5088 points • 2 SBUSs • 8 Flexput® circuits that can be programmed as auxiliary power, notification appliance output, or as a conventional input. • 9 amps of power • Class A or B wiring for NACs, SBUS, and network. • Compatible with either IDP (System Sensor) devices or SD (Hochiki) devices. • Network dialing gives allows you to dial from one control panel on a network saving you money on telephone lines • 4 x 40 LCD display • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock®
|
 |
IFP-1000 • One onboard SLC circuit that can support 99 IDP (System Sensor) devices/99 IDP modules, or 127 SD (Hochiki) devices. Expandable to a total of 792 devices/792 modules IDP, or 1016 SD devices. • 6 amps of power • 6 Flexput circuits that can be programmed as auxiliary power, notification appliance output, or as a conventional input • Built-in UL listed DACT (digital alarm communicator transmitter) • 1 SBUS • 4 X 20 LCD display • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock®
|
|
 |
IFP-100 • One onboard SLC circuit that can support 99 IDP (System Sensor) devices/99 IDP modules, or 127 SD (Hochiki) devices • 6 amps of power • 4 Notification circuits that can be programmed as either aux power or as a notification output • Built-in UL listed DACT (digital alarm communicator transmitter) • 1 SBUS • 4 X 20 LCD display • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock® |
 |
IFP-50 • One onboard SLC circuit that can support 50 IDP (System Sensor) devices/50 IDP modules, or 50 SD (Hochiki) devices • 2.5 amps of power • 2 Notification circuits that can be programmed as either aux power or as a notification output • Built-in UL listed DACT (digital alarm communicator transmitter) • 1 SBUS • 4 X 20 LCD display • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock®
|
|
 |
IFP-25 • Combines the convenience of conventional control panel programming and configuration using addressable devices that provide all the data required for calibrated smoke test as required by NFPA 72 • Built-in support for a combination of up to 25 Honeywell Fire System detectors and modules • Programming is easily done just by setting the code wheels on the detectors or devices then the control panel automatically maps them to the correct zone. • Custom programming can be done with a laptop by simple plugging into the control panel and opening your web browser, the control panel has a built-in web page dedicated to system programming. • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock®
|
|||
| Emergency Communications | ||||
 |
• Scalable Analog/Addressable Fire Alarm Control w/Integrated Emergency Communication System • Supports up to 128 speaker circuits that can be easily mapped with programming software. • Uses distributed amplifier that can provide up to 2000 watts of power using either the ECS-DUAL50W (50/100 watt amp, dual channel, 16 max), the ECS-50 (50 watt amp, 16 max) or ECS-125 (125 watt amp, 16 max)
|
 |
• Analog addressable fire alarm control combined with integrated emergency communication system. • Can Select ECS message as priority over fire alarm • 15 recordable messages that can be mapped to eight ECS buttons • Supports up to 7 ECS-RCU’s. The ECS-RCU meets the requirements for a LOC • Programmable trigger inputs from an external source , such as a Monaco system, to either the VCM, RVM, or 5880. Up to 8 inputs available on each 5880 module • Fire alarm and ECS combined in one easy to program system
|
|
 |
• Analog addressable fire alarm control combined with integrated emergency communication system. • Can Select ECS message as priority over fire alarm • 15 recordable messages that can be mapped to eight ECS buttons • Supports up to 7 ECS-RCU’s. The ECS-RCU meets the requirements for a LOC • Programmable trigger inputs from an external source , such as a Monaco system, to either the VCM, RVM, or 5880. Up to 8 inputs available on each 5880 module • Fire alarm and ECS combined in one easy to program system |
 |
• Standalone emergency communication system that may be used for fire applications, mass notification applications or both. •50 watts of 25V audio power, expandable to 100 watts • 2 amp Notification Appliance Circuit (NAC) output •Up to 14 recorded messages •8 Command Input Circuits to active message 1 to 8 •Integral supervised microphone
|
|
| Fire Fighter Telephone System | ||||
 |
• Addressable Fire Fighter Telephone System • 24 zone system expandable to 72 zones • Easy one button programming • Compatible with all Silent Knight fire alarm control panels • Up to 10 fire fighter remote hands sets can be on the system at one time • Separate SLC circuit from the fire alarm control panel so you don’t use any points from your fire system. |
|||
| Communicators | ||||
 |
IPGSM-4G |
|||
IPGSM-DP - Discontinued
|
||||
| Very Early Warning Devices | ||||
 |
||||
| Honeywell Analytics | ||||
 |
Protecting and performing for the commercial building industry, Honeywell Analytics gas & flame detection products safeguard building occupants and assets. FS20X FS24X SS2-A SS2-AM SS3
|
|||
| Graphical Monitoring Software | ||||
 |
IFP-NET-3 | |||
| Fire CO Detection | ||||
 |
IDP-FIRE-CO | |||
| Alertus Technologies | ||||
 |
The Alertus Solution | |||
