|
 |
Farenhyt Resource Site
IFP Series of Products |
 |
IFP-2000 • 636 points per panel • Networkable with up to 8 nodes (16 nodes for Select Distributors) for a total of 5088 points • 2 SBUSs • 8 Flexput® circuits that can be programmed as auxiliary power, notification appliance output, or as a conventional input. • 9 amps of power • Class A or B wiring for NACs, SBUS, and network. • Compatible with either IDP (System Sensor) devices or SD (Hochiki) devices. • Network dialing gives allows you to dial from one control panel on a network saving you money on telephone lines • 4 x 40 LCD display • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock®
|
 |
IFP-1000 • One onboard SLC circuit that can support 99 IDP (System Sensor) devices/99 IDP modules, or 127 SD (Hochiki) devices. Expandable to a total of 792 devices/792 modules IDP, or 1016 SD devices. • 6 amps of power • 6 Flexput circuits that can be programmed as auxiliary power, notification appliance output, or as a conventional input • Built-in UL listed DACT (digital alarm communicator transmitter) • 1 SBUS • 4 X 20 LCD display • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock®
|
|
 |
IFP-2000VIP • All the features of the IFP-2000 fire alarm control panel • Supports up to 64 speaker circuits that can be easily mapped with programming software. • Uses distributed amplifier that can provide up to 1000 watts of power using either the VIP-50 (50 watt amp, 8 max) or VIP-125 (125 watt amp, 8 max) • 3 user recordable voice messages that can uploaded and used for other job sites |
 |
IFP-1000VIP • All the features of the IFP-1000 fire alarm control panel • Supports up to 64 speaker circuits that can be easily mapped with programming software. • Uses distributed amplifier that can provide up to 1000 watts of power using either the VIP-50 (50 watt amp, 8 max) or VIP-125 (125 watt amp, 8 max) • 3 user recordable voice messages that can uploaded and used for other job sites |
|
 |
IFP-100 • One onboard SLC circuit that can support 99 IDP (System Sensor) devices/99 IDP modules, or 127 SD (Hochiki) devices • 6 amps of power • 4 Notification circuits that can be programmed as either aux power or as a notification output • Built-in UL listed DACT (digital alarm communicator transmitter) • 1 SBUS • 4 X 20 LCD display • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock® |
|
IFP-100VIP • All the features of the IFP-100 fire alarm control panel • Supports up to 64 speaker circuits that can be easily mapped with programming software. • Uses distributed amplifier that can provide up to 1000 watts of power using either the VIP-50 (50 watt amp, 8 max) or VIP-125 (125 watt amp, 8 max) • 3 user recordable voice messages that can uploaded and used for other job sites • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock®
|
|
 |
IFP-50 • One onboard SLC circuit that can support 50 IDP (System Sensor) devices/50 IDP modules, or 50 SD (Hochiki) devices • 6 amps of power • 4 Notification circuits that can be programmed as either aux power or as a notification output • Built-in UL listed DACT (digital alarm communicator transmitter) • 1 SBUS • 4 X 20 LCD display • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock®
|
 |
IFP-25 • Combines the convenience of conventional control panel programming and configuration using addressable devices that provide all the data required for calibrated smoke test as required by NFPA 72 • Built-in support for a combination of up to 25 Honeywell Fire System detectors and modules • Programming is easily done just by setting the code wheels on the detectors or devices then the control panel automatically maps them to the correct zone. • Custom programming can be done with a laptop by simple plugging into the control panel and opening your web browser, the control panel has a built-in web page dedicated to system programming. • Built-in synchronization for System Sensor®, AMSECO, Gentex®, or Wheelock® |
